AMF S-311 Manuel de service télécharger pdf (Page 90)

Revised 11/2006

E-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com

Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606

S-311+I

1-10 I

D - MACHINE FUNCTIONS CONTROLS

2. SETTING UP THE INDEXER DISPLAY

389

CT 20

Ready

100001 0

1 0 0 0 0

6 5 9

Thread nipper

Activation of Indexer button

IND

The IND button must be illuminated

to get into the Indexer display.

If you change the display settings from S-311 to S-311 Indexer and wise versa,

remember or note down all data.

(Note.: E01-machine is not in the home position)

S-311 INDEXER SCREEN

Go back to the previous screen.

Once all axes are in the home

position and all parameters

saved, message

appears on the display.

Ready

Buttonhole

counter

Pressing this button will

activate the image mode.

If the function is on,

the Indexer operation 1,2,3

…..will change to.…3, 2, 1.

Pressing this mode will bring

the machine into the auto

mode. In such case, the

machine sews one cycle

from left to right and the

next cycle from right to left.

According to the number

of indexes selected,

the display shows respective

number of buttonholes.

Pressing any of these

buttonholes will bring up

the screen on which you can

select buttonhole

parameters. Maximum

number of buttonholes that

can be sewn is 8; it means 7

Indexer values.

This button is used to move

in axis X-Y during

stepping considering the

buttonhole selected.

the table

This button

enables selection

of the direction of the Indexer

from left to right (-->).

Repetitive pressing changes

the direction from right to left (-->).

* Pressing this button

brings up a screen on

which you can set up

the required distance

between two

buttonholes (in mm).

This button enables manual sewing of

buttonholes by stepping from one Indexer

value to another; for instance 1,2,3, ……

If you select Auto mode after a certain

index, the machine automatically starts

sewing the next indexer buttonhole in a row.

Pressing this button

moves all axes back into

the home position.

* The maximal possible stroke of the Indexer is 160 mm. The combination must be selected considering the number of buttonholes to be sewn

with the Indexer.

The minimal distance between two buttonholes is 7mm. It is a standard distance and has to be adjusted for required values.

Select the mode of cutting

after or cutting before.

S-311 display

Main screen

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 103 104

Commentaires sur ces manuels

Pas de commentaire

AMF S-311 Manuel de service Page 90

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à coudre AMF S-311